After trying to use the auto-connect feature in Vivado multiple times, I have been unable to get my blackboard to be detected. I have tried using 2 different usb connectors on 2 different devices to no avail. I have also tried using my professor's blackboard with the same connector which did work (should be noted that they've had this blackboard for a while now). One thing that I noticed is that when I plug the connector into the prog slot on the blackboard no LED shows up, however, when I plug it into the EXTP port an LED does light up. I am not sure how to proceed or if part of my board is defective as this is my first time using this blackboard. Any help or advice is much appreciated. Thanks.